Four key components for updating your original model X-Carve to the one launched in Sept '16.
If I have a 500mm X-Carve, can I buy the 1000mm Upgrade Kit and get both a bigger and updated machine?
Asked by Ken Witt on Aug 31, 2016
The description above indicates that you would need additional parts.
Just off the top of my head, the waste board, belts, wires, and drag chain would be different between the models. You would also likely need more T-slot nuts and screws.
Answered by Patrick Weigle on Aug 31, 2016
Patrick is correct. We unfortunately do not have those kits available for individual sale, so you’d have to source those components through their individual product pages.
Answered by Paul Stolz on Aug 31, 2016
What is the upgrade path from the Shapeoko 2 to the new X Carve?
Asked by PR Smith on Aug 31, 2016
Unfortunately, the new X-Carve is not directly compatible with the Shapeoko 2. You would need to first purchase the Shapeoko 2 Upgrade Kit (which we still have a few of through the old configurator page) in order to upgrade your Z-axis, X-Carriage, and belts, and then get this upgrade kit here for the Wide Makerslide, X-controller, Z-probe and side board.
Answered by Paul Stolz on Aug 31, 2016
The video mentioned ridigity improvements. Is there an upgrade path for that?
Asked by Justin C on Aug 31, 2016
The main rigidity fix is the wide makerslide, which can be purchased here:
https://www.inventables.com/technologies/wide-makerslide
If you are having any issues with the eccentric nuts coming lose and affecting your rigidity, we also offer eccentric spacers and nylock nuts that you can use instead. You would of course have to buy longer screws as well.
Answered by Paul Stolz on Aug 31, 2016
does the upgrade kit include the eccentric spacers?
Answered by The Guru on Sep 10, 2016
It does not, but here is what you’d need:
Eccentric Spacer 0.375" Long 25195-08 – 2 pcs
Answered by Paul Stolz on Sep 12, 2016
Eccentric Spacer 0.200" Long 25195-07 – 8 pcs
Button Head Cap Screw M5 x 40 25286-51 – 2 screws
Button Head Cap Screw M5 x 30 25286-05 – 8 screws
Hex Nut M5 Nylon Locking 30265-01 – 10 pcs (1 10 pack)
I’d love to be able to buy a rigidity set too, instead of piecing all of these little things for my upgrades.
Answered by Jay Johnson on Sep 23, 2016
yes, if these items were available as a simple kit, it would make lives easier.
Answered by Daniel Potthast on Oct 25, 2016
I will pass your feedback along to our product team.
Thanks!
Answered by Paul Stolz on Oct 25, 2016
Paul
The x-controller has new connectors that the original X-Carve did not, will the upgrade kit include the required connectors?
Asked by Justin C on Aug 31, 2016
Hi Justin,
The X-controller terminals are the same. The new wiring kits have ferrule connectors that make it slightly easier to plug the wires into the terminals on the X-Controller. Those ferrules can be purcahsed individually here if you are interested – https://www.inventables.com/technologies/insulated-ferrule-kit
Answered by Paul Stolz on Aug 31, 2016
For shipping internationally, can you omit the MDF sideboard?
To reduce the cost of international shipping, can you omit the MDF from the upgrade kit? Thanks.
Asked by Chris Byrne on Aug 31, 2016
Hi Chris,
While we can’t separate the individual components in this particular kit, you can purchase the individual items from the kit (and simply omit the sideboard from your cart) by clicking on the links in the product details above.
Answered by Paul Stolz on Aug 31, 2016
What a shame. That adds $50 to the shipping costs. I was hoping to simply eliminate the weight of a $3 piece of MDF costing a lot to ship to UK. Oh well.
Answered by Chris Byrne on Aug 31, 2016
Hi Chris,
I’ve emailed you directly for clarification.
Answered by Paul Stolz on Aug 31, 2016
I have a 1000mm X-carve with X-controller that I am assembling now. What all can be ordered to upgrade it?
it appears from the video that there are some additional parts that are changing that are not listed here. Can you provide a kit or a list of parts that can be ordered to change out to the newest version?
Asked by Craig Stueve on Aug 31, 2016
Unfortunately, some of the components that are in the new X-Carve are not available for individual sale. These components are mainly used to make assembly faster. The components in this Upgrade Kit are the ones that are used to improve performance.
Answered by Paul Stolz on Aug 31, 2016
Will the upgrade be available without the sideboard entirely?
The sideboard is unnecessary for me. Unless there’s a reason for the electronics being level with the wasteboard and in the sideline of fire of flying chips, I’m not seeing the benefit. For me, I would need to discard the sideboard entirely. I would locate the electronics under the machine or at least a couple feet away.
As a suggestion how about a foot button for E-Stop? Or maybe a port to plug in a secondary foot E-Stop cable farther from the machine. You may not want to be physically near the machine or reaching over the machine if something is going so wrong you have to E-Stop. Asked by Jonas Rullo on Aug 31, 2016
Hi Jonas,
You can purchase the other three components through their individual product pages listed in the product details above, so that you don’t have to purchase the sideboard.
In terms of an E-stop extension, I’ll pass your feedback along to our engineering team for future consideration. In the meantime, you could theoretically extend the wiring on your E-stop and separate it from the X-Controller, although that is currently an unsupported modification and we wouldn’t be able to support that.
Answered by Paul Stolz on Aug 31, 2016
I am upgrading my original machine with the new X-Controller. Perhaps like others, I added an E-Stop when doing the original wiring to the front of the machine. I also want to mount the X-Controller to the bottom and “upside” down. My E-Stop “chops” power to the power supply so I can continue to use MY E-Stop, wiring THEIR E-Stop per the kit instructions. Also, there are 3 pushbutton switches on the X-Controller that would be hard to access with my mounting configuration. I think they can be “pulled-out” and located elsewhere. There would be a concern about “noise”, but I verified with Inventables that there is “debouncing” in their software, so external mounting should not be a problem. I don’t know yet how to use these switches. I did order the complete kit since it looked like it was cheaper than ordering all separate parts. I didn’t know at that time whether or not I could mount underneath so I just ordered. MY major concern at this time is whether or not I can get 24 VDC from the X-Controller for use in my external control panel. I know I can always “hot wire” it, but it would be nice if it was brought out via a separate pin. The bottom line is that the E-Stop and other 3 switches “constrain” where and how you mount the X-Controller. For some new and old users, letting users bring out these signals would be helpful. But, there is only so much you can do. On balance, the X Controller is a significant improvement over the previous wiring.
Answered by Gary Linn on Sep 17, 2016
Just buy old x carve.
I just buy old x carve on 25 Aug. do you have any discount this upgrade for me. thank
Asked by Sirawat Pulsree on Aug 31, 2016
Hi Sirawat,
Please contact out support team here for specific inquiries:
https://inventables.desk.com/customer/portal/emails/new
Answered by Paul Stolz on Aug 31, 2016
500mm Shapeoko to X-Carve to X-Carve 2.0
I have a 500mm SO2 that’s been upgraded to an x-carve minus the new x-controller. I’ve been pondering going to 1000mm and I’m tantalized by
“NOTE: A 500mm machine cannot be upgraded to a 1000mm machine without additional parts.”
So, please, please, please give me a one click upgrade path. Or at least a “fill my cart with everything it takes” button.
If none of that please just tell me what “additional parts” are needed.
Please, please, please :-)
Asked by The Guru on Aug 31, 2016
Hello,
I will email you directly with the items needed to upgrade the size of your machine.
Answered by Jeffrey Ma on Aug 31, 2016
I'm not ready to upgrade right now, will the upgrade kit be available in 2017?
Asked by Alan Smith on Sep 1, 2016
Hello Alan,
Yes, the upgrade kit will continue to be available in 2017.
Answered by Jeffrey Ma on Sep 1, 2016
Upgrade Plus
I believe that the upgrade option also needs the belt and pulley improvements to fully transform a version 1 machine to version 2. Can the new belt clips and permanent pulleys be purchased in addition to the current upgrade kit?
Asked by Chris Slaten on Sep 1, 2016
Hi Chris,
Unfortunately we do not have those assembly components available as of yet, but we are planning to in the near future, so stay tuned!
Answered by Paul Stolz on Sep 1, 2016
How about a Kit with everything but the X-Controller?
I built my 1000mm X-carve with the X-Controller several months ago. Can you make a version of the kit with everything but the X-Controller since I already have it?
Asked by Paul Kiefert on Sep 1, 2016
Hi Paul,
Sure! Everything is available individually through the product links in the “Product Details” section above!
Answered by Paul Stolz on Sep 1, 2016
Not sure where my previous question went. Could you please tell me what the lead time is for the upgrade kit?
Asked by Roger Jennings on Sep 1, 2016
Hi Roger,
The Upgrade Kits will start shipping out before the end of this month!
Answered by Paul Stolz on Sep 2, 2016
Upgrade, X-Controller on order?
I am currently awaiting delivery of an X-Controller. Would it be possible to add the items necessary to upgrade the rest of my 1000mm X-Carve.
Asked by Peter Wilkens on Sep 2, 2016
Hi Peter,
We’ve actually emailed all customers who ordered their X-Controllers and are still waiting for them individually!
Answered by Paul Stolz on Sep 2, 2016
What happened to the old machine!
Is it possible to make the new upgraded items optional so people can still buy the old machine and its parts (I know you sell them individually, so can you put together a list of parts for the old machine).
Asked by Jayden Downes on Sep 2, 2016
We have a limited supply left of the old machines here – https://www.inventables.com/technologies/x-carve-2015
Answered by Zach Kaplan Inventables on Sep 3, 2016
I would like to upgrade my x carve it has never been put together would yall take any parts on trade in
Asked by Joseph nelms on Sep 12, 2016
Hello Joseph,
I have emailed you directly regarding this.
Answered by Jeffrey Ma on Sep 12, 2016
I have a same question, if possible to shoot me an email?
Answered by Kenneth W Nelson on Sep 13, 2016
I was told that if not opened they would take on return
Answered by Joseph nelms on Sep 13, 2016
Hello Kenneth,
Joseph is correct. If the items are unopened and/or in it’s original condition, you may definitely return the items back to us for a full refund.
I have emailed you directly regarding this.
Answered by Jeffrey Ma on Sep 13, 2016
Hello, I am in a similar situation, purchased in 2015 but only partially assembled (stopped after putting the end plates on the y-assembly). Will you accept the untouched parts for return or does it have to be the entire system?
Answered by Gavin G. on Sep 20, 2016
Hello Gavin,
I have emailed you directly as well.
Answered by Jeffrey Ma on Sep 20, 2016
Hello,
Answered by Robert Laughter on Sep 21, 2016
I have an unopened X-carve as well. Can you send me an email on how I can send it back to get the new version?
Thank you for calling in, Robert. Please direct your questions to the support center if you have any more regarding your specific questions.
Thanks,
Answered by Paul Stolz on Sep 21, 2016
Paul
Thanks, Jeffrey. I responded to your email.
Answered by Gavin G. on Sep 21, 2016
Thanks for the help, Jeffrey. I placed the order.
Answered by Gavin G. on Sep 24, 2016
Power supply
The “X-Controller” link under “What’s included” points to the X-Controller kit, which includes a power supply. Is there a power supply included with the upgrade kits?
Asked by Patrick Weigle on Sep 15, 2016
Hi Patrick,
Yes, the X-Controller has a built-in power supply.
Answered by Paul Stolz on Sep 15, 2016
Plugs on motors?
Video shows and states that all cables now have plugs. Where are the NEMA 23 motors with plugs?
Asked by Jay Johnson on Sep 23, 2016
Hi Jay, at the moment we aren’t selling the connectorized motors w/attached pulleys individually, though we should be bringing them into regular stock in the next few months. We apologize for the confusion. Best, -Griffin.
Answered by Griffin Dennis on Sep 26, 2016
Shipping
Are you guys still on track to ship the upgrade late September? I live in canada and am wondering when I can expect it. Thx
Asked by David Kutchaw on Sep 26, 2016
Hello, David –
Answered by Mo Stych on Sep 26, 2016
Yes, we are on track for shipping in late September, but most kits will likely ship in the first or second week of October due to how many orders we have received. All of our orders are shipping in chronological sequence, so depending on when your order was placed will determine when it ships. You will receive a tracking code when your order leaves our warehouse. Let me know if I can help with anything else!
Thanks again for your order,
- Mo
Connected pulleys?
How are the pulleys “connected”?
Asked by Jay Johnson on Sep 27, 2016
Hi Jay, thanks for your question! I spoke with our product team and was told that the pulleys are press-fit onto the motor shaft.
Answered by John Hayes on Sep 27, 2016
New pulleys
What is the sku of the motors with the pulleys which are press fitted to onto the shaft, and formed with the plug connectors for cables?
Asked by Jay Johnson on Sep 27, 2016
Hello Jay,
The SKU # for the new stepper motors is 25311-06 but, unfortunately, they are not available for individual purchase on our website yet.
I apologize for the inconvenience.
Answered by Jeffrey Ma on Sep 27, 2016
500mm X-Carve to 1000mm upgrade?
Do you have a kit configuration to make the move from 500mm to 1000mm and upgrade to the new system in one shot?
Asked by Patrick Rainsberry on Sep 28, 2016
Hello, Patrick –
Thanks for reaching out to us about upgrading both your size and machine components. The short answer is that, no, we do not offer a kit configuration that does this. Due to how many new components you’ll need to buy in order to upgrade to a larger size, we recommend buying a new machine if you want a larger machine.I’ve sent you an email with more information about why we don’t recommend doing what you’re inquiring about. Let me know if I can help with anything else. Thanks!
Answered by Mo Stych on Sep 29, 2016
- Mo
yes patrick because I purchased from you people yesterday all parts necessary to rebuild my 500mm machine. I also purchased the new controller which included wiring and true 1000 mill gantry 510 dollars still cheaper and then I will rebuild the other 500m and sell it as I have small 17 motors and i will make my other metal parts
Answered by peter mcneill on Nov 22, 2016
sorry my last post should go to mo stych, also do I qualify for the 50 dollar gift certificate
Answered by peter mcneill on Nov 22, 2016
Will you offer the upgrade kit without the X-Controller, for those who already have it?
Asked by J. Alexander Jacocks on Sep 29, 2016
Hello, we do not have a kit with everything except the X-Controller, though you can find the components for sale individually. The side board: https://www.inventables.com/technologies/x-carve-side-board-kit , the wide makerslide: https://www.inventables.com/technologies/wide-makerslide and the z-probe. Please let us know if you have any other questions. Best, -Griffin.
Answered by Griffin Dennis on Sep 29, 2016
laser machine
do you have a lase r to be add to me 31×31 x carver?
Asked by jim sterling on Sep 29, 2016
Hi Jim, we do not offer any lasers as add-ons to the X-Carve, nor do we recommend such modification. There are some users that have used aftermarket kits, though we do not support these. Please let us know if you have any other questions. Thanks, -Griffin.
Answered by Griffin Dennis on Sep 29, 2016
Hi Jim. We have laser upgrade kits for the X Carve. Check it out here:
Answered by Jay Johnson on Oct 5, 2016
https://jtechphotonics.com/?page_id=3565
Like Griffin says, we are not affiliated with Inventables, but there is a large community on the forums who have upgraded their machines successfully, including us. Safety is always first, and we have several safety products as well for sale. Thanks, Jay
Hi Jay and All others, Inventables has not tested the laser upgrade kit for X-Carve. Due to safety concerns with the X-Carve’s open design we do not recommend this upgrade for X-Carve and we do not approve it. Thanks for your understanding.
Answered by Philip Lomac Inventables on Oct 5, 2016
quero saber do preco da maq x carve 1000 qnto curco dela total e preco e como recebo e pago tbm e garantia dela.
Asked by ADILSON on Oct 6, 2016
Olá, se você ir para o site X-Carve, você pode ver os preços das máquinas. Se você adicioná-lo ao seu carrinho você pode ir para o checkout e usar a calculadora para determinar o custo do transporte. Infelizmente, não podemos fornecer estimativas sobre as taxas aduaneiras. Obrigado, -Griffin.
Answered by Griffin Dennis on Oct 11, 2016
Can I buy a new 1000mm waste board when I order the upgrade? Mine is warped when it got wet. I tried to salvage it but...
Asked by Larry Tullock on Oct 24, 2016
Hello Larry,
We do sell the waste boards individually so you can definitely purchase one along with the upgrade kit. Here is the link to the waste boards:
Answered by Jeffrey Ma on Oct 24, 2016
https://www.inventables.com/technologies/waste-board-with-threaded-inserts
order placed after August 31st sent the old version
hola, recién compramos una X-CARVE 1000 mm el invoice tiene fecha 9/27/16 y #74065, sin embargo recibimos la versión pasada. Cuando revisamos la lista de materiales no es igual a la versión actual. Esperabamos recibir la version actualizada.
Asked by Sthefany Alvarez on Oct 27, 2016
just bought a X-CARVE 1000 mm and we figured out it was the old version. We thought it would be the updated one.
Answered by Sthefany Alvarez on Oct 27, 2016
Software
Is software available for IPad Air 2
Asked by Terry Dodson on Oct 30, 2016
Hi Terry, unfortunately there is no support for iPad devices at this time. We apologize for the trouble. At the moment we are limited to Macintosh or Windows computers. Please let us know if you have any other questions. Best, -Griffin.
Answered by Griffin Dennis on Oct 31, 2016
z probe
Do you need the upgrade to use the z probe?
Asked by Ken Timblin Sr. on Nov 22, 2016
Hi Ken, thanks for contacting us, We only officially support use of the Z-probe with an X-Controller, though it is possible to do on an Arduino so long as you have the correct wiring and firmware (grbl 1.0c) installed. You can find information on connection here: https://github.com/grbl/grbl/wiki/Connecting-Grbl We do not officially support this, so your mileage may vary. Please let us know if you have any other questions. Best, -Griffin.
Answered by Griffin Dennis on Nov 22, 2016
$409-$100= $309 not $359, whats up with that?
Asked by Weird Guy on Nov 24, 2016
oops Xcarve $100 off only $50 off the upgrade,
Answered by Weird Guy on Nov 24, 2016
That’s correct. Sorry for the confusion.
Answered by Paul Stolz on Nov 25, 2016
Let me be a Chromebook ... Please try ...
Let me be a Chromebook … Please try …
And .. if something is stiff .. x axis y axis z axis does not work well .. what should I do?
asadarxy@gmail.com
Asked by sangmoon yun on Nov 26, 2016
Hi Sangmoon, unfortunately we don’t currently support Chrome OS with Easel, but there are ways to send g-code. There is a sender here: https://chrome.google.com/webstore/detail/gcode-sender/ngncibnakmabjlfpadjagnbdjbhoelom and a video on its use here: https://youtu.be/DUB8n5law2o Please let us know if you have any other questions. Best, -Griffin.
Answered by Griffin Dennis on Nov 28, 2016
500mm Shapeoko 2 to X-Carve to X-Carve 2.0 1000mm
What’s the upgrade path?
Asked by Justin Bell on Nov 27, 2016
Hi Trevor,
To upgrade your machine, you will need to Shapeoko 2 Upgrade Kit which you can find here – https://www.inventables.com/technologies/shapeoko-2-upgrade-kit
Then, you can order the upgrade kit here to complete the upgrade.
Answered by Paul Stolz on Nov 28, 2016
Shapeoko 2 to x-carve upgrade available?
i have an older shapeoko 2 that i would like to upgrade to an X-carve with out the controller as i am currently using a tinyg. Is there any upgrade kits available or a build list i can use to accomplish this?
Asked by Trevor Barbera on Nov 28, 2016
Hi Trevor,
To upgrade your machine, you will need to Shapeoko 2 Upgrade Kit which you can find here – https://www.inventables.com/technologies/shapeoko-2-upgrade-kit
Then, you can choose which items you’d like from this kit, as they are listed in the product details above.
Answered by Paul Stolz on Nov 28, 2016
Can the Wide Makerslide be used for the Shapeoko 2 End plate (or Prev Xcarve)?
I have a 1m x 1m Shapeoko 2 and it’s Y-Axis plates (also previous X-Carve) have only 1 × 2 Hole configuration.
The Wide makerslides need 2 × 2 hole configuration. Wouldn’t i need a new Y axis plate? It doesnt seem to be included in this kit.
Or this Wide MakerSlide is only for the X-Axis?
Asked by Paolo Miguel Aguirre Pabalinas on Dec 3, 2016
Hi Paolo, thanks for contacting us. Generally we recommend that the wide makerslide only be used for the X axis. We aren’t using these makerslide rails on the Y axis at the moment. You would need to fabricate custom end plates if you wanted to do that. Please let us know if you have any other questions. Best, -Griffin.
Answered by Griffin Dennis on Dec 5, 2016
Can I order this with a Dewalt Router Included?
Asked by Paolo Miguel Aguirre Pabalinas on Dec 3, 2016
Hello, Paolo –
Answered by Mo Stych on Dec 5, 2016
Thanks for reaching out to us. Unfortunately, it is not possible to buy the DeWalt router directly on our website. I’ve sent you an email with a few options. Thanks!
- Mo
Drag Chain Kit upgrade
I’ve noticed the new version has a better drag chain support. Can the products be purchased as a kit as well? (I was unable to search for the individual parts)
Asked by DamnitJim on Dec 6, 2016
Hello, unfortunately we aren’t selling those individually at the moment, though we should hopefully be bringing more upgrade components live in the next few months. You can always buy a 20mmx20mm extrusion and tap the ends by hand, but you would still need to make or get the appropriate brackets. Please let us know if you have any other questions. Best, -Griffin.
Answered by Griffin Dennis on Dec 6, 2016
Mach3
Hi guys.
If i will buy this upgrade kit, my x carve will be compatible with mach3 controller?
Asked by Jakab Tamás on Dec 17, 2016
Hi Jakab, thanks for contacting us. Unfortunately our controllers are not compatible with Mach3 as they do not use a parallel port. They are best controlled with a program like Universal GCode Sender. Please let us know if you have any other questions. Best, -Griffin.
Answered by Griffin Dennis on Dec 20, 2016
Parts included in this kit
I am interested in upgrading my pre-2015 Shapeoko 2 to a 1000×1000 machine. I understand that the first step is the Shapeoko 2 upgrade kit, then this kit to get to the size I want.
My question is two fold. First, what parts are duplicating functions that are already provided by my older machine (i.e. the X-controller and sideboard [since the electronics are already mounted under the machine]),
and second, are there 3 pieces of 1000mm wide makerslide included in the kit?Essentially, it appears that once I have the Shapeoko 2 upgrade kit, the only additional items I would require from this kit to get a 1000×1000 machine would be the longer motor cables and the longer slides (for a total cost of ~$165 for 3 1000mm makerslides and 15’ of cable). Is this assessment correct, or am I missing something?
Asked by Keith DePew on Jan 10, 2017
Hello Keith,
I have emailed you with documentation showing the items you will need to complete the upgrade.
Answered by Jeffrey Ma on Jan 10, 2017
Hello,
Answered by jan wouda on Jan 18, 2017
I have the same question as Keith. I would like to upgrade my shapeoko2 1000×1000 to the new X-carve too. Can some of you send me also a list of items I’ll need to complete the upgrade?
I also have a similar question. I have a Shapeoko 2 that is 500×1000. I looked for the upgrade kit, but cannot find it. Can you send me the information to upgrade to an X-Carve? Can i just upgrade the X-Axis or is there more to it? I mainly want to move up from my quiet spindle to the DeWalt 611 and also add the dust collection system.
Answered by John Boisvert on Apr 26, 2017
Hello, everyone -
We have added two articles to our Support Center to help with these types of upgrade requests:
Upgrading ShapeOko 2 to X-Carve
Upgrading from 500mm XC to 1000mm XC
(this article covers going from the 2015 model to current model, too)We hope these articles help you upgrade your machine!
- Mo
Answered by Mo Stych on Apr 27, 2017
Power sup
Is there a difference between the power supply that came with my original x-carve and the one in the x controller? I’m just wondering why I couldn’t have reused the power supply I already had.
Asked by John Bickford on Jan 16, 2017
Hi John, I don’t believe that there’s any difference between the power supplies. Unfortunately since the controllers are kitted when we get them we haven’t been selling any of the components ‘broken out’ from the kit. Please let us know if you have any other questions. Best, -Griffin.
Answered by Griffin Dennis on Jan 17, 2017
24VDC spindle wiring
I am almost finished installing all of the components of the upgrade kit but I’m not sure how I’m supposed to wire my 24VDC spindle to the XController. It says it doesn’t power the spindle now. Do I need the old power supply and some kind of relay now?
Asked by Mark Maness on Jan 16, 2017
Hi Mark, you should use your old power supply to run the 24V DC spindle. You can leave everything connected except for the speed control wires which should now go from the PSU to the ‘Spindle PWM’ and the adjacent ‘GND’ ports on the X-Controller. No power should be supplied from the X-Controller itself. Please let us know if you have any other questions. Best, -Griffin.
Answered by Griffin Dennis on Jan 17, 2017
Upgrading a Shapeoko 2
I have a Shapeoko 2 and I have purchased both the Shapeoko 2 and X Carve upgrade kits. I have three questions:
1. I would like to also upgrade either the X or Y axis to 750mm. Which axis would be the better to upgrade? What additional parts would I need to do this?
2. Would it be worth upgrading the motors during the move to X Carve?
3. Would it be better to do each upgrade in turn or simply dismantle the Shapeoko and build the unit from scratch?Thanks in advance for your help.
Asked by Colin White on Jan 23, 2017
Hi Colin, thanks for contacting us. It is possible to upgrade one axis or both to 750mm if you wish, though in addition to the 750mm makerslide rails you’ll need more wire, drag chain lengths (if you have a drag chain) as well as 20×20mm extrusions for the bottom frame of the machine. Generally we advise upgrading the Y axis as it will have slightly less flex than the gantry, though if you want a wider X axis instead, there’s no problem upgrading with the new single piece wide makerslide. You would also have to make a new wasteboard to cover the whole cutting area of the machine. Upgrading the motors to NEMA 23 is a good idea since you’ll want to take advantage of the extra power you’ll get with the X-Controller. I happen to think that just doing the upgrades will probably be fine, though given that you’re changing the size you’ll probably have to do at least a partial disassembly of the whole machine. I would keep subassemblies together, but disassemble the frame. Please let us know if you have any other questions. Best, -Griffin.
Answered by Griffin Dennis on Feb 3, 2017
Z Probe
Is the code to run the zprobe built in to the new controller or will i need to write a code?
Asked by Ken Timblin Sr. on Feb 6, 2017
Hi Ken, if you’re using the z-probe with Easel, Easel itself has a canned cycle that it runs. If you’re sending probing code manually, you’ll want to use the following rubric:
`G20 [switches to inch mode, can use G21 if you’ll be working in mm]
G91 [switches to relative mode]
G38.2 Z-1.000 F2.500 [core of the probe cycle, moves the Z axis down 1" at a rate of 2.5IPM until the probe makes contact]
G10 L20 P0 Z0.200 [sets the z axis work coordinate to the thickness of the puck]
G91 G20 G0 Z0.500 [retracts the bit by 0.5"]`You can, of course, vary these parameters both in Easel and when sending the code by hand. Please let us know if you have any other questions. Best, -Griffin.
Answered by Griffin Dennis on Feb 6, 2017
Here’s the uncommented code for the sake of clarity:
G20
Answered by Griffin Dennis on Feb 6, 2017
G91
G38.2 Z-1.000 F2.500
G10 L20 P0 Z0.200
G91 G20 G0 Z0.500
I have a Shapeoko 2 500 and would like to upgrade to X Carve 1000. I don't need to change my step motors. What are the parts I need?
I have a Shapeoko 2 500 and would like to upgrade to X Carve 1000. I don’t need to change my step motors. What are the parts I need?
Asked by Francisco Viana on Feb 20, 2017
I have a Shapeoko 2 500 and would like to upgrade to X Carve 1000. What parts do I need?
I have a Shapeoko 2 500 and would like to upgrade to X Carve 1000. I don’t need to change my step motors. What are the parts I need?
Asked by Francisco Viana on Feb 20, 2017
Hello Francisco,
Unfortunately, we do not have a kit available to get a Shapeoko 2 up to an 1000mm X-Carve. You would first need to purchase the Shapeoko 2 Upgrade kit to get the machine to a 2015 model X-Carve and then you would have to purchase many individual components to upgrade the size of the machine. I have emailed you a list of items you will need to purchase in order to expand the size of the machine.
Answered by Jeffrey Ma on Feb 20, 2017
Please email me that same list.
Answered by Bob Cammer on Mar 1, 2017
thebobolopolis9753@hotmail.com
Thanks for your time!
-Bob
Sent!
Answered by Jeffrey Ma on Mar 1, 2017
Could I please get that list as well if it still exist? i just upgraded to the X-Carve (v.1) from a shapeoko 2. I have the urge to go bigger and get the x-controller :D
Answered by Kyle Hendrickson on Mar 16, 2017
Hi, Kyle –
Answered by Mo Stych on Mar 17, 2017
I sent you an email with some more information. Thanks!
- Mo
Thank you!
Answered by Kyle Hendrickson on Mar 17, 2017
I too have a Shapeoko 2 and would like to build it into an X-Carve 1000. Can you also send me the parts list. I understand the easy upgrade to an X-Carve 500 (2015). Thx Bill
Answered by William P. Fleming on Mar 23, 2017
Email sent, Bill!
I’ll work on getting a support article up about this for others to reference in the future. Thanks for your patience!
Answered by Mo Stych on Mar 23, 2017
Mo, can I get that list as well? Thanks
Answered by Christopher Bienlein on Apr 26, 2017
We have added two articles to our Support Center to help with these requests:
Upgrading ShapeOko 2 to X-Carve
Upgrading from 500mm XC to 1000mm XC
(this article covers going from the 2015 model to current model, too)We hope these articles help!
- Mo
Answered by Mo Stych on Apr 27, 2017
2017 shipping times
Are the upgrade kits still on a 6 to 8 week lead time?
Asked by Christopher Bienlein on Mar 3, 2017
Hi Christopher, officially, 6-8 weeks is still the lead time on these kits, though we hope to be able to ship them out sooner than that. Please let us know if you have any other questions. Best, -Griffin.
Answered by Griffin Dennis on Mar 3, 2017
Is there a Drag Chain upgrade kit for the 1000mm pre-September 2016 units?
Asked by Carl Brothers on Mar 12, 2017
Hi Carl,
Unfortunately, we do not sell the updated drag chain kit outside of the configurator at this time. I apologize for the trouble. Once our shipping line settles down a little, we may be able to sell the kits individually, but right now, we have to prioritize the customers who are buying the kit with the machine.
Answered by Paul Stolz on Mar 13, 2017
parts
Im needing a new acme lead screw for my 1000 76mm and also a complete hardware kit for waste board. Cant find a section to order parts
Asked by Matt Malone on Mar 13, 2017
Hi Matt,
I will email you directly regarding your issue.
Answered by Paul Stolz on Mar 13, 2017
I am trying to find a way to order a replacement part for my 1000mm X-carve. Can anyone point me in the right direction please?
I have only been using the X-carve for about a week and the Dust boot ended up coming loose and slide down in turn got caught and popped loose causing it get eaten up by the router. I have tightened the hand screws holding it on several times over, but it doesnt seem to stay tight. Resulting in this happening. Any place that I can order the lower plexiglass section with the brush attached? The upright plexi pieces are fine minus not staying tight
Asked by Michael Sims on Apr 12, 2017
Thank you in advance
Hi Michael,
As we do not sell dust boots, we can’t offer replacements. You may want to check with the company that you bought the boot from to see if they offer replacement parts.
Thanks,
Answered by Paul Stolz on Apr 12, 2017
Paul
It’s made of plexiglass, you have a router. Figure it out
Answered by Phillip Gamito on May 31, 2017
Why isn't there any loyalty discount for folks that bought the original previous Xcarve.
It really pisses me off that for the same price of my X-carve, I could have an Xcontroller… and upgraded X axis…
Asked by matt pearson on May 28, 2017
I bet technology makes you angry a lot. :)
Answered by Kevin Price on Jun 6, 2017
You can’t read well can you? I bet books make you angry. I say good day troll.
Answered by matt pearson on Jun 7, 2017
Hey, guys, thanks for your feedback.
Matt, I sent you a response back on May 30 with some more information about how we may be able to work with you. If you don’t see an email from me, please let me know and I can try to send it again.
Please try to keep this space civil and respectful, so others can find answers to their questions.
Sincerely,
Answered by Mo Stych on Jun 7, 2017
- Mo
I received the email, I have seen the sales with what was offered. When I said loyalty, I meant loyalty. My current X Carve performs with no issues. I would just like to have the X controller and the Z probe. Maybe the X axis.
Answered by matt pearson on Jun 7, 2017
Hi again, Matt -
I’ll reach out to you again via email. Thanks!
- Mo
Answered by Mo Stych on Jun 7, 2017
I do kinda agree with Matt. Can you reach out to me Mo? Thanks
Answered by Brandon on Jul 5, 2017
Hi Brandon,
We’ve reached out to you directly regarding our policy.
Answered by Paul Stolz on Jul 6, 2017
Could you let me know the deal also please?
Answered by ItzMe Again on Jul 13, 2017
I don’t like Matt’s tone or agree with his comparison of price since the x-carve is a piece of technology. As with any other technology, the new version is often better and cheaper. However, I do agree with the basic idea of what he is asking. As a loyal customer that pre-ordered his x-carve back in April 2015, you begin to feel like a part of something bigger as you work through issues with the product along side Inventables and the community. It is completely possible that Inventables just can’t afford to offer the discount as they feed money back into the business to improve the product and expand the offerings. But, if possible, I would have liked to see a discount on the upgrade kit for those loyal customers that have been with you since the beginning.
Answered by Chad Forrester on Jul 14, 2017
Hi all, thank you for your feedback on this matter. We designed this upgrade kit as a convenient way for existing customers to get a discount on machine upgrades given that you save about $67-$77 (depending on the size) on this kit vs purchasing the kits individually. Please let us know if you have any additional questions. Thanks, -Griffin.
Answered by Griffin Dennis on Jul 14, 2017
where can I get a collett to fit .256 shaft on some tapered bits.
where can I get a collet to fit some .256 tapered bits
Asked by Larry Wright on May 30, 2017
Hi Larry, I’m unsure if there is a collet available for any of our spindles that will fit that particular size- is this a nominal 6.5mm size? In some cases you may be able to fit such a bit into a nominally 1/4" collet, however 0.006" would probably be too big of a difference.
Answered by Griffin Dennis on May 31, 2017
I bought a !/8 small bit holder for my dewalt router from the internet.
Answered by jim sterling on Jul 7, 2017
from the internet a reducer 1/4 to 1/8.
Answered by jim sterling on Jul 7, 2017
Alternative use
I’m a test engineer tasked with creating an economical test solution for measuring the electrical characteristics of sonar elements (piezo ceramics). As such I have an idea to use an X-Carve for something entirely different than what it was intended for. I want to move a set of test probes (similar to voltmeter leads), over a circuit board and lower them at various points. In place of the router would be a custom designed holder for the electronic test probes. The intent being that the Z-axis would lower the probes of an RLC meter or and Impedance Analyzer down to components (such as capacitors or pins connected to small nickel sized ceramic disks), on the circuit board and make capacitance and impedance measurements. The accuracy appears to be adequate however I don’t know if the repeatability will allow the X-Carve to traverse 120 positions and continue to hit within 0.072mm and 0.13mm of the intended target. I do have the option of recalibrating but not until the test run of 120 elements is complete (about 60 seconds for each of the 120 test locations). I also need to know if the Z-axis downward force can be controlled or its motor current “sensed” to prevent it from crushing an expensive ceramic should something go wrong.
Asked by Charles F. Englehart on Jun 8, 2017
Hi Charles, I would say that this is possible, however it will probably require more time invested in hacking software than hardware. There’s a pick and place machine that some people have put together with a makerslide frame: https://www.liteplacer.com/ This is probably closer to what you’re looking for and may offer better resources. In terms of creating an interactive closed-loop system that actively senses probe status and other factors, you may have to do some work with the controller firmware as well as the PC-side interface. g-code may not be the most optimal command format for this application, though it could prove usable. Best, -Griffin.
Answered by Griffin Dennis on Jun 9, 2017
what do i need to upgrade 750mm to 1000 mm
I have a 750mm x-carve and want to upgrade to a 1000mm
Asked by Timothy Byrne on Jul 9, 2017
Hi Timothy, going from a 750mm machine to 1000mm machine is a fairly extensive upgrade path since you’ll need to purchase new rails, belting, wiring, waste board, side board (if applicable), and drag chains. The plates, carriages, wheels, spindle, and controller are about the only things that can be carried over. You’ll also need to contact us to get some of the kit components (like the drag chains) added to your order manually since they aren’t inventory items. Please let us know if you have any other questions. Best, -Griffin.
Answered by Griffin Dennis on Jul 10, 2017
What are the shipping box weight & dimension of the x-carve upgrade kit ?
What are the shipping box weight & dimension of the x-carve upgrade kit ?
Asked by VERON Christian on Jul 11, 2017
Thanks
Christian
Here are the weights and dimensions for the two different kits:
1000mm Upgrade Kit – 42″ × 4″ × 10″ box, 15 lbs
plus X-Controller - 13″ × 8″ × 9″ box, 8 lbs500 mm Upgrade Kit – 6″ × 12″ × 24″, 9 lbs
Answered by Paul Stolz on Jul 12, 2017
plus X-Controller - 13″ × 8″ × 9″ box, 8 lbs
Can we add the Delete function to the Q&A?
I would like to delete my question. It has been answered and even though I didn’t like the answer I got, I respect it.
Asked by matt pearson on Jul 14, 2017
Is there any plans to make the Z-probe into a 3 Axis probe?
I am looking at the competitions 3 axis and I feel that Inventables should really bring the whole enchilada to the table. The dust system is nice, but I think that Rail protectors and 3 axis zeroing should be made into a kit.
Asked by matt pearson on Jul 14, 2017
Hi Matt, thanks for contacting us. At the moment we’ve stuck with a Z axis probe for the sake of simplicity, however there are aftermarket options (like the Triquerta) that will do 3 axis zeroing. You’ll have to roll your own probing code to use these, but it’s fairly simple to do in practice. Please let us know if you have any other questions. Best, -Griffin.
Answered by Griffin Dennis on Jul 14, 2017
materials used on
Can it be used concrete or glass Asked by john carey on Jul 16, 2017
Hi John, we generally only recommend that our machines be used with wood, plastic and, in certain cases, soft metal. Concrete and glass usually require the use of liquid cooling and abrasive bits. While some have modified their machines for such operations (see forum apocrypha) It’s not something that we recommend at all. Best, -Griffin.
Answered by Griffin Dennis on Jul 17, 2017
Does this kit include the DeWalt 611 Spindle Mount?
Does this kit include the DeWalt 611 Spindle Mount?
Asked by Esam Alghamdi on Aug 7, 2017
Hi Esam,
No, it does not. You can find that mount here: https://www.inventables.com/technologies/x-carve-dewalt-611-spindle-mount
Answered by Paul Stolz on Aug 7, 2017
Hello, this Upgrade kit is compatible with my shapeoko 2?
I currently have ir with dewalt 611 mount? Thanks.
Asked by Ronald Rosales on Aug 10, 2017
What I mean is that I have the X-carve Dewalt spindle mount, already installed. thanks, By the way, I really like the redesign of your website, congrats!
Answered by Ronald Rosales on Aug 10, 2017
Hi Ronald, thanks for contacting us. In theory you could attach this to a shapeoko 2, though it might be a good idea to get a new X-axis carriage as well. The side board may be a bit difficult to attach, but it should work. Please let us know if you have any other questions. Thanks, -Griffin.
Answered by Griffin Dennis on Aug 10, 2017
quite cut spindle
What us the difference of using your “Quiet Cut Spindle”, as compared to just using my De Walt Router? Does the router power the “Quiet Cut Spindle”.
Asked by frank barker on Sep 7, 2017
Hi Frank, thanks for contacting us. The Quiet Cut spindle is a DC spindle that runs off of a 24 or 48V power supply. This is separate from the DeWalt Spindle and no longer officially supported on the X-Carve. Best, -Griffin.
Answered by Griffin Dennis on Sep 7, 2017
X-Carve 300W 24VDC Spindle Kit Compatibility
Is this X-Carve Upgrade Kit compatible with the original X-Carve 300W 24VDC Spindle Kit purchased in July 2015? Are there any articles showing the difference between my current spindle and the new DeWalt 611 Spindle (perhaps showing why the DeWalt 611 is the better choice now?)
Asked by Daniel Crawford on Nov 6, 2017
Hi Daniel, thanks for contacting us. This kit will be perfectly compatible with a machine with the old 24V spindle. The biggest compatibility issue would be with the dust shoe kit which is designed for the 611 setup. Other than that most all of the upgrades will work without issue. As far as the difference between the 24V spindle and the DeWalt, the DeWalt is considerable more powerful than the 24V spindle. We also had some production issues with the 24v spindle that led us to discontinue it in favor of the DeWalt. You will need to keep your old 24V PSU for the spindle as well since the X-Controller can’t supply power to a spindle. Please let us know if you have any other questions. Best, -Griffin.
Answered by Griffin Dennis on Nov 6, 2017
Drag chain upgrade?
I’m confused that this kit does not include the drag chain upgrade kit, which I believe is necessary for the side board to be useful. What am I missing?
Asked by Hans Gerwitz on Jan 3, 2018
Hi Hans, I will contact you via email about this. Thanks, -Griffin.
Answered by Griffin Dennis on Jan 3, 2018
upgrade
is there a 1800mm upgrade for the XXL?
Asked by Jamie taylor on Feb 2, 2018
Hi Jamie, there is no upgrade kit available to make a 1800mm machine, though it’s technically possible with the parts in our store. I would look in our forum for more details about such a build since we don’t support it directly. Please let us know if you have any questions. Best, -Griffin.
Answered by Griffin Dennis on Feb 2, 2018
Convert from old 1000mm to new 500mm
I have an old 1000mm machine, but realized it was too big for my use. How do I “upgrade” to a 500mm machine?
Asked by Alfred To on Mar 4, 2018
Hi Alfred, thanks for contacting us. There are a few ways of going about this. One method would be to cut down your railing and perhaps your wasteboard, though you would want to make sure that everything was square. You can also purchase new rails and a new wasteboard separately and use those. You’ll still have to truncate parts like the drag chain, but otherwise it should work. Please let us know if you have any other questions. Best, -Griffin.
Answered by Griffin Dennis on Mar 5, 2018
Is there a upgrade kit available for the older 750mm x carves?
Asked by jason britton on Mar 30, 2018
Hi Jason, There hasn’t been any upgrade to the machine since we launched the 750mm size so we don’t really have an upgrade kit available for it. Best, -Griffin.
Answered by Griffin Dennis on Mar 30, 2018
When will this be available?
When will this be available? 8-10-18 and we need this upgrade for this seasons robotics competition. It will not allow me to purchase the 1000mm upgrade for our x-carve. We need it asap to stay competitive this season.
Asked by Joe Trucker on Aug 10, 2018
Sorry for the trouble! You should be able to check out now.
Answered by Paul Stolz on Aug 10, 2018
I have a Xcaver that my son gave me it is the 500mm. I'm wanting to upgrade to the 1000mm. I
Asked by Keith Allen on Oct 30, 2018
Hi Keith, we currently don’t have a size upgrade kit available. This product is for updating the version of the machine, not the size. You would need to order each individual component that makes up the 1000mm machine. This may be a good resource to use: https://inventables.desk.com/customer/portal/articles/2795274?b_id=9562&t=0
Answered by Julie Bryant on Oct 31, 2018
500 to 1000 conversion
I purchased the 1000 upgrade, but I noticed that I need other components to complete the size change from 500 to 1000.
Asked by Ron Case on Nov 20, 2018
Can you offer me some advice or guidance?
Hi Ron,
We currently don’t have a size upgrade kit available. This product is for updating the version of the machine, not the size. You would need to order each individual component that makes up the 1000mm machine. This may be a good resource to use: https://inventables.desk.com/customer/portal/articles/2795274?b_id=9562&t=0
Answered by Paul Stolz on Nov 20, 2018
Stepper motor cable.
What is the advantage in installing the stepper motor cable for the X-Controller’s extra stepper driver?
Asked by Steven Wollman on Dec 24, 2018
Hi James, the advantage is that you’re simply able to provide more power to your stepper motors when wiring them separately. You are sharing one stepper driver between two motors when wired together. The stepper drivers on the x-controller are capable of 4A per winding, so you’re still getting more power to your stepper motors when wired together compared to the Arduino/gShield controller, hence the option in the instructions not to wire an additional length of stepper motor cable though I would recommend you take the time to wire the two motors separately.
Answered by John Hayes on Dec 26, 2018
Thanks John, I was hoping that there would be an upgrade on accuracy as well.
Answered by Steven Wollman on Dec 28, 2018
Hi James,
Unfortunately, the tolerances on the machine won’t change with the different wiring.
Answered by Julie Bryant on Dec 28, 2018
Upgrade from 500mm to 1000mm
Good day guys, I have X-carve 500mm and would like to upgrade it to the 1000mm but sure what I need to do so. From the threads, I notice there is still no such upgrade kit. Please can you advice me what I need to be able to so. Thank you in advance for the help. Jacques
Asked by Jacques Venter on May 7, 2019
Hi Jacques, you’ll need to purchase each individual component that has a size factor. This includes the rails, stepper motor and homing switch kits (for the wires), drag chain, belts, and the wasteboard. There’s a more thorough list here: https://docs.google.com/spreadsheets/d/1ugxYQ_wXTe1ogTJY-pzK0-4jGDNJDoBJd9yJk7J0LDw/pubhtml?gid=0&single=true&widget=true&headers=false
Answered by Julie Bryant on May 7, 2019
Hi Julie,
Thank you so much for the list. I have tried finding all the parts listed but with no luck what so ever. For example, I currently do have the Nema23 stepper motors and only need the new wiring but I am unable to only order the wire. Is there no way that Inventables can see what I have purchased from them before (upgrade kits and forth) and assit me with a complete list of items with prices to upgrade to the 1000mm. I have not added anything to the x-carve that has not come from inventables and to be honest, to purchase a complete new 1000mm would be sensles and an expensive exercise. Your help would be gratly appreciated. Just to add in. Since buying the 500mm, I have upgraded the machine to the new 2016 version. If that can help.
Answered by Jacques Venter on Jun 12, 2019
Hi Jacques, I followed up with you about this via email.
Answered by Julie Bryant on Jun 12, 2019
Why no upgrade option for the 750? Is there a way to use the newer controller?
I’d like to upgrade my 750 to be more durable and ready for the long haul. Why no kit? If no kit, what are some individual parts that can be upgraded? Can I use the new controller?
Asked by Kevin Hakes Miller on May 7, 2019
Hi Kevin, if you have the 750mm machine, it the most up-to-date hardware version. Originally, we only released the X-Carve as a 500mm or a 1000mm. You can use the X-Controller on a machine that originally had the Arduino/gShield, and you can purchase that seperately here: https://www.inventables.com/technologies/x-controller-kit
Answered by Julie Bryant on May 7, 2019
Is that only 1000mm version for sale now?
Is that only 1000mm version for sale now?
Asked by blackdogpapa on Dec 4, 2019
Both the 500mm and 1000mm upgrade kits are currently still available.
Answered by Paul Stolz on Dec 4, 2019
I am actually interest to buy 750mm version, is that for sale? If not, how could I buy 500mm? Its seems that only 1000mm version for sale on your shop!
Answered by blackdogpapa on Dec 4, 2019
If you are looking for a new X-Carve machine, we only sell the 1000mm machine. If you are looking to upgrade your existing 500 mm machine, you can do so with the kit on this page.
Answered by Paul Stolz on Dec 5, 2019
Cost and maximum cutting serface
What is the entire cost hardware and software. Referring to the 1000. What is the working area size????
Asked by Stuart MacLeod on Dec 6, 2019
Hello Stuart,
Thank you for your message, I have emailed you directly with additional information.
Answered by Giovanna Diaz Fabiani Inventables on Dec 6, 2019
Can the x-carve be purchased with the upgrade and still come complete for the $1999.00 plus upgrade cost?
Can the x-carve be purchased with the upgrade and still come complete as offered for the $1900.00, plus upgrade?
Asked by Richard Metteer on Jan 5, 2020
Thie kit is for upgrading your original model X-Carve to the one launched in Sept ’16. If you buy a new machine, it will already include all of these items.
Answered by Paul Stolz on Jan 6, 2020
Upgrades
Is the 1000×1000 the biggest x carve available, or is there an upgrade to make it bc a bigger size?
Asked by Charles Castillo on Jun 16, 2020
Hi Charles,
We only have the one machine size, the 1000mm X-Carve. We do not support expanding the machine past this size.
Answered by Paul Stolz on Jun 16, 2020
Availa
Asked by Eddie DeJong on Dec 28, 2020
Availability?
I am an owner of the original X Carve and would like to upgrade but your store says this is unavailable. Any idea when. the upgrade kits will be back in stock?
Asked by Eddie DeJong on Dec 28, 2020
Hi Eddie,
Thanks for your message. It looks like the upgrade kits are back in stock. I apologize for the delay. We’ll be here if you have any other questions!
Answered by Giovanna Diaz Fabiani Inventables on Dec 29, 2020
Thanks Giovanna, it still says ‘unavailable for purchase’ and the Checkout button is greyed out.
Answered by Eddie DeJong on Dec 30, 2020
Eddie,
I’ll email you directly for troubleshooting. Thanks!
Answered by Giovanna Diaz Fabiani Inventables on Dec 30, 2020
Is this still avalible?
Putting it into the shopping card, says it’s unavailable for purchase.
When will this be available?
Asked by Euan Walker on Jun 24, 2021
Hi Euan, thanks for reaching out. Unfortunately, the 500mm X-Carve update bundle kit is no longer available. We’re working to remove this from the page. However, you can still purchase the individual components from our shop. I’ll email you directly with additional information.
Answered by Giovanna Diaz Fabiani Inventables on Jun 29, 2021
Pre-2016 1000x1000 uogr
I have a pre-2016 X-Carve. I am looking at the new update released this year and am looking at upgrading the controller as well from the gshield. Do I just need the two upgrade kits to make this change?
Asked by Colin Barney on Oct 27, 2021
Hey Colin,
This kit (X-Carve 2015 to 2016 Update Kit) is for upgrading your original model X-Carve to the one launched in Sept ’16. This brings older models up to current stock X-Carve components. This includes the following:
- X-Controller
- Wide MakerSlide
- Side Board
- Z-Probe
- Stepper Motor Cable
- X-Carve sticker for the MakerSlideThe X-Carve Upgrade Kit includes the components of both the 9mm Belt and Motor Kit and the Z-Axis Kit (with risers and stiffeners), which are meant for improving the efficiency and structure of the machine.
Answered by CJ Glasenhardt Inventables on Oct 28, 2021
Expected to ship by 7/30 ?
The shopping card shows “Expected to ship by 7/30” for the kit. Is that for real in 2022 or an error? All the components by them self seem to be in stock. Is it possible to get the kit w/o the sideboard for reduced price?
Asked by Oliver Dorn on Nov 9, 2021
Hi Oliver, this is an error. I’ve removed that copy. These kits are currently in stock and ready to ship.
Answered by Paul Stolz on Nov 9, 2021
Thank you very much!
Answered by Oliver Dorn on Nov 9, 2021
Shapeoko 2 upgrade
I have a Shapeoko 2 with 100×100 cm and would like to know if this is the correct kit for upgrading it. Thank you in advanced
Asked by Tania Lima da Costa on Dec 27, 2022
Hey Tania,
While it is possible to update a Shapeoko 2 to become an X-Carve, it is not a very simple process that would be covered with one purchase like this. If you are looking to update your machine to be close to the current 1000mm X-Carve, it is very likely more cost-effective and efficient to buy a new machine, as you are essentially building an entirely new machine anyway.
To answer your question, this kit is specifically for updating the 2015 model X-Carves (which can essentially be seen as the next generation after the Shapeoko 2) to the 2016 model X-Carves. There are other parts that would be necessary to convert your Shapeoko 2 to an X-Carve that are not present in this bundle.
You can find this article about updating a Shapeoko 2 to a 2015 model X-Carve: Upgrading a ShapeOko 2 to an X-Carve (2015 Model).
Even with earlier models of the X-Carve, many of the components are no longer available directly, as they have been updated and changed over the years. You can find more details about that here: Update/Upgrade Older X-Carve Models.
I apologize for not being able to help directly, but I hope this helps provide some clarification! If you have more questions about this, I would recommend reaching out to our support directly.
Answered by CJ Glasenhardt Inventables on Dec 28, 2022
Thank you so much for your explanation!
Answered by Tania Lima da Costa on Dec 29, 2022
