Beyond Design
Chicago, Illinois
This clock uses the mechanism from the Inventables store, a minimal red HDPE housing, and a few options of custom acrylic clock hands.
| Material | Description | Price | ||
|---|---|---|---|---|
|
Black HDPE Sheet |
Thickness: 1/2 in don't use, Dimensions: 8 in × 12 in don't use |
||
|
Clear Acrylic Sheet - Cast |
Dimensions: 8 in × 12 in, Thickness: 1/8 in, Material Type: Extruded |
$4.99 |
|
|
Clock Mechanism |
Press on movement; accommodates dial up to 3/8 in thick |
||
| This project's Bill of Materials is not complete. Add to Cart |
$4.99 |
|||
Using 1/2" or even 3/4" material, mill the two part housing for the clock mechanism.
Use this EASEL link
Mill the clock hands using a ballnose endmill, this will give those shallow channels.
Use this EASEL link
Switch to a square or fishtail endmill and cut the profile for the clock dials.
Use this EASEL link
If you decide you want a more traditional clock face you can cut simple hands from an opaque acrylic material.
Use this EASEL link
minal roy
minal roy