Monogram Pumpkin

“Trick or treat” was cut using a 1/16" upcut end mill and the “Pumpkin” cut using an 1/8" single flute upcut endmill. The parameters were as follows:

Improvement – My tabs were a bit thin and ended up breaking loose during cutting! I would make those tabs a bit stronger!

Primed with white primer. You can skip this about go straight the paint paint, but using primer and sanding once dry will give you project a smoother finish and vibrant colours!

Pick your favourite colour and get painting! I used Krylon Pumpkin Orange spray paint and it turned out great!