Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Family Bench

2 likes
21 opens
4 copies
0 comments
Chris Baber

Project by

Chris Baber
Kentucky

General Information

Show the world you love your family with this semi rustic Beanch

Like this project Open in Easel®
1

Video

YouTube Video

2

What you will need.

12″×2″×4ft Board of your choice.
x2 10″ × 1″ 3/4 × 14″ leg boards .
black spray paint
clear spray paint
X-Carve
planer
sanding tools
wood glue
chisel
jig saw or saw saw

3

Find your board placement

Cut your legs the thickness of the top board and leave and 8" tenon to go up thru the top board
Find center of the 4ft board Mark the legs about 6" from the ends and center them in the board
Trace your legs.

4

Drill and Cut

Cut your leg holes in top.
First drill a holes in each corner
use the jig saw or saw saw to cut most of the tenon out and then use the chisel to finsh up for a good fit.

5

Carve it

Set up the Easel program to fit your legs and top and cut out the feet and family sign

6

Paint

Paint the inside of the letters black and the same to the feet

7

Planer/sander

Use the planer or sander to remove the paint from the top portion of the wood. This should only leave the black in the letters and feet.

8

Assembly

Now just use a little wood glue and put it together. Use the clear paint to seal off the wood from water damage . You can put what ever water proofing finish you want . I just used clear spray paint.