Bow Bread Knife

Import the .svg knife shape file into Easel. You can resize it if you want, but you must also scale the blade at this point.

Secure the material on the waste board. As I had not had time to make bigger clamps, I had to stick my material on a thinner board before starting.

Now let the X-Carve work for you!

The X-Carve can finish the cut, but I prefered to part it off with the band saw.

You can skip this step, but watch out for splinters! ;)

Import the .svg knife blade shape file into Easel. Secure the material again & cut the blade. You can also use an old & cleaned band saw blade for this part. But I just wanted to show you that is possible to carve one here.

Round the corners with a router table. By the way, don’t laugh about mine! :D

Do a light final sanding before applying the finish.

Apply the finish you want on the wood. I suggest a bees wax & mineral oil mixture.

Drill holes on both end of the bow.

Fix the blade on the bow with 2 screws.

Now it’s time to cut your fingers or your bread. Here it’s up to you! ;)

Special Thanks:
Inventables: https://www.inventables.com/

Website: http://lepicbois.net/
YouTube: https://www.youtube.com/lepicbois
Facebook: https://www.facebook.com/AtelierLePicBois
Instagram: http://instagram.com/atelierlepicbois
Twitter: https://twitter.com/atelierpicbois

Support me on Patreon: https://www.patreon.com/lepicbois

Please enjoy & share!